Skip to main content

How reliable is the Audi Q2 Technik 30 Tfsi?

Owner-reported reliability data — inspection results, typical mileage, and the most common failures.

The Audi Q2 Technik 30 Tfsi consistently passes first-time inspections at an above-average rate. The most commonly reported issues are tyre tread depth not in accordance with the requirements, a tyre seriously damaged, a tyre cords visible or damaged. Typical mileage by age and a year-by-year breakdown of reliability are shown below. All figures are owner-reported real-world data, not a marketing rating.

Reliability & Breakdown Risk
93.4% pass rate

Above average reliability

Based on 1,824 inspection tests. First-time pass rate: 93.4%.

First-time inspection pass rate93.4%
Dangerous defect rate
3.1%
Retest rate
6.4%
Typical mileage by age2021 cohort
Age 3
41,635 km
Age 5
Age 10
Annual mileage distributionfrom 47 vehicles
Bottom 10%
7,174 km
Low 25%
9,982 km
Median
13,215 km
High 25%
18,098 km
Top 10%
23,946 km
Most common inspection failures
Tyre tread depth not in accordance with the requirements1.9%
A tyre seriously damaged1.8%
A tyre cords visible or damaged0.9%
a brake lining or pad worn below 1.5mm0.8%
Windscreen washers not working or not providing sufficient fluid to clear the windscreen0.7%
Where failures most often occur
Front Nearside(2.1%)
Front Offside(2%)
Rear Nearside(1.2%)
Reliability indicators are model-level averages from Carlytics-analyzed inspection and breakdown records, not specific to this individual vehicle.

Audi Q2 Technik 30 Tfsi reliability by year

How the Audi Q2 Technik 30 Tfsi performs at first-time inspection, broken down by the year cohort. Empty cells mean we don't have enough owner-reported data for that year yet.

Year cohortPass rateTypical mileage @ 5 yrs
090.9%24,599 km
201991.6%61,858 km
202091.1%60,757 km
202193.4%

Model-level pattern, not per-car prediction

These figures describe the Audi Q2 Technik 30 Tfsi as a model. The reliability of any individual Audi Q2 Technik 30 Tfsi also depends on service history, accident history, and how it was driven. Run a free VIN check to see the records attached to a specific car you're considering.

Buying a Audi Q2 Technik 30 Tfsi?

Reliability tells you the pattern. A VIN check tells you the car.

Frequently asked questions

Is the Audi Q2 Technik 30 Tfsi reliable?

Based on owner-reported inspection records, the Audi Q2 Technik 30 Tfsi consistently passes first-time inspections at an above-average rate. Its first-time inspection pass rate sits around 93%. Reliability varies by year and engine — see the year-by-year breakdown on this page for the specific cohort you're considering.

What are the common problems on the Audi Q2 Technik 30 Tfsi?

The most common owner-reported issues are: Tyre tread depth not in accordance with the requirements (1.9% of inspections); A tyre seriously damaged (1.8% of inspections); A tyre cords visible or damaged (0.9% of inspections); a brake lining or pad worn below 1.5mm (0.8% of inspections); Windscreen washers not working or not providing sufficient fluid to clear the windscreen (0.7% of inspections).

What mileage is normal for a Audi Q2 Technik 30 Tfsi?

For a typical Audi Q2 Technik 30 Tfsi, owner-reported average mileage works out to about 41,635 km at 3 years, — at 5 years, and — at 10 years. The mileage section on this page shows the full distribution — high-use vs low-use cars often differ by a factor of three.

How do I check a specific Audi Q2 Technik 30 Tfsi before buying?

Enter the 17-character VIN on Carlytics. The free check shows decoded specs and open safety recalls. The full vehicle history report (from EUR 8.90) cross-references owner-reported issues, mileage records, and stolen-vehicle databases for the specific car — model-level reliability tells you the pattern, the VIN check tells you the car.

More reliability data

Popular models with reliability data